186€ sa kuponom za KINGROON KP3S Pro jednoručni 3D štampač, direktni ekstruder, – EU 🇪🇺 – GEEKBUYING

SAMO [U EVROPI – EU]. 186 € with our EXCLUSIVE COUPON for KINGROON KP3S Pro Single-Arm 3D Printer, Direct Extruder, Resume Printing, Filament Break Detection, TMC2225 Silent Driver, 32-bit Motherboard, Internal Power Supply, 96% Pre-Assembly, 200*200*200mm

🇪🇺 [IN EUROPE - EU]KINGROON KP3S Pro Single-Arm 3D Printer, Direct Extruder, Resume Printing, Filament Break Detection, TMC2225 Silent Driver, 32-bit Motherboard, Internal Power Supply, 96% Pre-Assembly, 200*200*200mm

186 € 205 €

Kupite ovu stavku

EKSKLUZIVNI KUPON

Ostalo je 7 dana

*NAPOMENA da ovaj kupon vrijedi SAMO ZA 🇪🇺 EVROPU 🇪🇺 - Evropa SKLADIŠTE! BESPLATNA I BRZA DOSTAVA iz Evrope!

Da biste saznali više o GeekBuying skladištu i carinskom porezu možete pročitati OVDJE

Za više kupona u evropskim skladištima kliknite - OVDJE

Za više KINGROON ponuda kliknite – OVDJE

Za više kupona GeekBuying kliknite - OVDJE

pregled

Compared to the KP3S, the Kingroon KP3S Pro has increased the print volume to 200*200*200mm and the printing speed from 150mm/s to 200mm/s, and upgraded the magnetic platform to a lattice one. 

Moreover, the Z-axis has been transformed from Pulley to micro rail; the Y-axis from micro rail to double pully; all being done in an effort to deliver higher precision printing. On top of all the above-mentioned upgrades, the icing on the cake would be the broken material detection and adjustable XY-Axis belt. 

karakteristike:

Compact design but a decent print volume of 200*200*200mm. Reliable titan direct extruder with a 3:1 gear ratio. Build-in switching power supply. Resume printing when unexpected power failure or filament outage happens. TMC2225 stepper driver ensured quiet printing. Enhanced accuracy by X, Y, and Z-axis linear guide rails. Stable print bed operation with larger support underneath. 95% pre-assembled for about 15 minutes of quick installation.

Istorija cijena kupona

STARI KUPONI

ID: 519670